验证式扭矩扳手试验机

验证式扭矩扳手试验机

Validator Torque Wrench Tester

The Validator is designed for testing and calibrating torque wrenches. This tool is not suitable for power tools. Ideal for checking torque tools on production floor daily or weekly to ensure the tools aren't falling out of calibration. Using a quality torque tester makes a safer world through accuracy and precision. Measuring torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures.

验证器被设计用于扭矩扳手的测试和校准。这种工具不适合电动工具。理想的检查扭矩工具在生产车间每天或每周，以确保工具没有落在校准。使用质量扭矩测试仪通过精度和精度使世界更安全。测量扭矩对于公司确保产品质量、安全性和可靠性不会受到损害是必不可少的。三美分的紧固件如果没有适当紧固，就会导致灾难性的或潜在的失败。

PRODUCT SPECIFICATIONS 产品规格

Product Details

The Validator is designed for testing and calibrating torque wrenches. This tool is not suitable for power tools. Ideal for checking torque tools on production floor daily or weekly to ensure the tools aren't falling out of calibration. Using a quality torque tester makes a safer world through accuracy and precision. Measuring torque is essential for companies to ensure their product's quality, safety and reliability isn't compromised. The failure of a three-cent fastener that isn't properly tightened can lead to catastrophic or latent failures.

Accuracy ± 1% of reading from 20% to 100% of full scale

产品简介

验证器被设计用于扭矩扳手的测试和校准。这种工具不适合电动工具。理想的检查扭矩工具在生产车间每天或每周，以确保工具没有落在校准。使用质量扭矩测试仪通过精度和精度使世界更安全。测量扭矩对于公司确保产品质量、安全性和可靠性不会受到损害是必不可少的。三美分的紧固件如果没有适当紧固，就会导致灾难性的或潜在的失败。

精度从20%到100%的准确度±1%

Product Benefits

Designed for testing and calibrating torque wrenches.

Perform daily or weekly verification tests to confirm wrenches are operating at proper torque setting.

Clockwise direction only.

Selection of three operation modes: Peak, First Peak & Track

Three units of torque measurements: (lbf.ft,N.m, kgf.m).

Includes 9V Li-ion rechargeable battery and universal charger (100-240 VAC).

Easy-to-use menu structure.

LCD display.

Small and lightweight.

Built-in mounting plate provides flexibility for mounting options. Suitable to be placed within the assembly line area.

Menu prompting calibration process.

Features Go / No Go LED that illuminates when high or low tolerance setting is achieved or out of tolerance.

Note! Do not use with electric or pneumatic tools.

产品特点

设计用于扭矩扳手的测试和校准。

进行日常或每周的验证测试，确认扳手在适当的扭矩设定下操作。

仅顺时针方向。

三种运行方式的选择：峰、首峰、轨

扭矩测量的三个单位：（LBF.FT，N.M，KGF.M）。

包括9V锂离子充电电池和通用充电器（100-240 VAC）。

易于使用的菜单结构。

液晶显示。

体积小，重量轻。

内置安装板提供了安装选项的灵活性。适合放置在装配线区域内。

菜单提示校准过程。

特征走/不走LED照明时，高或低公差设置实现或超出公差。

注意！不要连接使用电动或气动工具。